Chimney Repair in Hudson - Inspected on Camera, Then Priced in Writing

Fast, Reliable Chimney Repair Across Hudson

Chimney repair in Hudson typically runs $450-$3,800 depending on whether you need repointing, a crown rebuild, or full stack reconstruction, and most jobs start with a Level 2 camera inspection that same week. We’re the Chimney Repair team at Level Two Chimney Co., and we’ve been dispatching crews to Hudson from our Boston office since 2009. Our technicians know the difference between a 1920s triple-decker near the Assabet River and a post-war ranch off Route 62, and that matters because the repair your chimney needs depends on which Hudson you live in. Call (978) 481-2900 to book a camera inspection with a written price before any work starts.

Call (978) 481-2900

Why Level Two Chimney Leominster Is Hudson’s Preferred Chimney Repair Company

We’ve completed more than 38,000 chimney inspections and cleanings since 2009, and a significant share of those have been in Worcester County’s older mill towns. Hudson customers find us through word of mouth in the historic neighborhoods around downtown and along Washington Street, where triple-deckers and worker cottages need technicians who understand shared flue systems.

Our reviews consistently mention the same things: the technician texted when en route, the camera footage showed exactly what was wrong, and the written price matched the final invoice. That’s Haven Standard Clause 1, and it’s how we operate on every Hudson job.

Dispatch and scheduling are coordinated from our Boston office, but crews serve Hudson locally with same-week availability for most repairs. We don’t charge a premium for Worcester County distance, and we don’t send technicians who’ve never seen a coal-era flue adapted for a pellet insert.

Every job is backed by our 365-Day Done Right Promise: if it’s not done right, we make it right. No exceptions.

Our Chimney Repair Services in Hudson

Mortar Repointing

Repointing in Hudson’s mill-era neighborhoods runs $18-$28 per square foot of joint surface, with most worker cottages and two-families needing $1,200-$2,400 for a full chase. The freeze-thaw cycling here inland is more severe than closer to Boston, and the original lime mortar in 1880-1925 brick was never meant to handle it. We grind out failed joints to proper depth and repoint with mortar matched to the original compressive strength, not modern Portland that traps moisture and accelerates spalling. In the triple-deckers near the old mill district, we often find that only one unit’s flue has been maintained while the shared masonry crumbles. We repoint the full chase, not just the visible face.

Spalling Brick Repair

Spalling repair in Hudson typically costs $800-$2,200 depending on how many courses need replacement and whether the damage extends to the firebox. The combination of heavy Worcester County snowfall, pronounced freeze-thaw, and the Assabet River corridor’s localized moisture creates perfect conditions for brick face failure. We’ve replaced entire courses in chimneys near the riverbank where efflorescence had been ignored for years. We source matching brick through our Haven buying network and document every course with photos before and after, per Clause 4 of the Haven Standard.

Chimney Waterproofing

Waterproofing a Hudson chimney runs $350-$950 for application after any open mortar joints or spalling are addressed. We use vapor-permeable sealants that let the brick breathe, because trapping moisture inside a 120-year-old chimney is worse than leaving it unsealed. For homes in the low-lying areas near the Assabet River, we often recommend crown sealing and cap replacement as part of the same scope, since river-corridor humidity finds every entry point. The work comes with a written warranty and photo documentation of coverage.

Flashing Repair

Flashing repair in Hudson costs $450-$1,100 for most residential jobs, with full replacement at the chimney-roof intersection running higher if the cricket needs rebuilding. This is the repair we get called about after every major storm: a brown stain appears on the ceiling, and the homeowner assumes it’s the roof. Often it’s step flashing that has pulled away from a spalling brick face, or counter-flashing that was never properly embedded into the mortar joint. We were called to a worker two-family near the old downtown mill district after a tenant’s pellet insert started back-drafting; a Level 2 inspection showed the insert’s flue had been dropped into a chase shared with the adjoining unit’s oil furnace vent, and the common brick had spalled so badly that we could see daylight through the mortar joints. We rebuilt the crown, repointed the shared chase with Gelco mortar, and installed a DuraFlex liner sized to the insert so the two flues no longer fought for draft. The back-draft stopped and the ceiling stain in the neighboring unit - traced to failed flashing, not the flue - cleared after we re-set the flashing and waterproofed the stack.

Before

After

Trusted Brands We Service in Hudson

We source repair materials through Haven’s buying network specifically to keep Hudson customer prices honest. For liner installations and restorations, we use DuraFlex stainless and HeatShield cerfractory flue sealant. For mortar work and crown rebuilds, we specify Gelco products matched to historic lime-mortar performance. These aren’t upsells - they’re the materials we specify in the written scope before work begins, and we keep common sizes in regional inventory so Hudson repairs don’t wait on shipping.

Common Chimney Repair Problems We See in Hudson Homes

• Shared multi-flue chases in triple-deckers. One tenant adds a pellet insert; only that flue gets cleaned. The shared masonry and neighboring tenants’ flues spall and crack unnoticed until draft failure or water intrusion affects everyone.
• Freeze-thaw mortar failure inland. Worcester County’s harder winters pop mortar joints and crack chimney crowns on unreinforced 1880-1925 brick. Water wicks down into the flue liner and firebox, accelerating damage you can’t see from the ground.
• Coal-era flues mismatched to modern inserts. Original chimneys built for coal, later adapted to oil, now venting wood or pellet stoves - often undersized or completely unlined, creating creosote buildup and draft hazards that a standard sweep won’t catch.
• Storm-driven flashing displacement. Wind and water drive into compromised crowns and displaced caps, then find the gap where flashing meets spalling brick. The first sign is often a ceiling stain after a nor’easter, misdiagnosed as a roof leak.

Pricing for Chimney Repair in Hudson, MA

We Also Serve Cities Near Hudson

Our crews repair chimneys throughout Worcester and Middlesex counties, including Hudson neighbors in Marlborough, Maynard, Clinton, and Northborough. Each community has its own housing stock and failure patterns - Marlborough’s split-levels present different flashing challenges than Hudson’s mill-era triple-deckers - and we scope every job to the specific structure, not a generic template.

FAQs - Chimney Repair in Hudson