Olympia Chimney Chimney Cap & Crown Nationwide

Olympia Chimney Chimney Cap & Crown in Leominster: What to Know First

We provide independent Olympia Chimney chimney cap and crown service in Leominster, with most jobs quoted and scheduled within 24 hours of your call. A standard cap replacement runs $280-$520 installed; crown repair or coating typically falls between $340-$780 depending on accessibility and the extent of water damage beneath. Every quote is written, itemized, and agreed to before our tech sets a ladder on your roof - that’s Haven Standard Clause 1, and it’s how we’ve operated since 2009.

Call (978) 481-2900

This page is for Olympia Chimney owners in Leominster and nearby towns who need cap or crown work and want to know what it costs, what parts fit, and whether their warranty stays intact. Corrine Halstead and our crew have handled Olympia Chimney systems across central Massachusetts for years, including the multi-flue setups common in the older homes near Monument Square. Call (978) 481-2900 for a free estimate, or read on for the specifics.

How Olympia Chimney Products Fail - and How We Fix Them

• Olympia Chimney Gelco-style single-flue caps in the 13″ x 13″ and 8″ x 17″ sizes develop corner-seam separation after 6-10 Leominster winters. The 304 stainless holds up, but the spot-welded corners trap freeze-thaw moisture from our wet March-April cycles. We replace with a Gelco equivalent from our Haven buying network or fabricate a custom cap with fully welded seams and a drip edge that extends past the flue tile.
• The Olympia Chimney multi-flue cap line with integrated screen suffers screen sag on south-facing chimneys in Leominster’s summer humidity. The mesh loosens at the crimp points, creating gaps that let squirrels and starlings nest. We remove the cap, assess whether the screen is field-replaceable (some 2018-2021 lots are not), and either re-screen with heavier 18-gauge mesh or source a direct-fit aftermarket cap from Famco that maintains the same exterior dimensions.
• Olympia Chimney’s standard concrete crown pours on pre-2015 installations lack the polymer modifier that later specs added. In Leominster, that means the crown surface starts spalling - flaking in thin sheets - after the first decade, especially where roof runoff from ice dams pools against the chimney shoulder. We grind back to sound concrete, apply a bonding agent, and pour a modified crown sloped at 3:12 minimum, or coat with HeatShield CrownCoat if the substrate is too thin to rebuild.
• The Olympia Chimney “slip-in” cap with exterior clamp band loosens on terracotta flue tiles that have minor surface erosion. The clamp bites into soft tile, the cap tilts, and water runs directly into the flue. We find this on Leominster’s 1920s-1950s housing stock where the original flue liners are still in service. Our fix: a cap with an interior leg kit that bears on the flue walls below the erosion zone, or a flue-top damper cap from Olympia’s current catalog if the tile crown is intact enough to support it.
• Olympia Chimney crown wash applications on factory-built chimney systems crack at the chase cover joint because the metal expansion rate differs from the concrete overlay. The chase cover lifts slightly each heating season, the wash separates, and water enters the chase cavity. We remove the failed wash, install a proper chase cover with cross-break and drip edge, and only then apply a flexible crown coating rated for the temperature swing.

Our Olympia Chimney Chimney Cap & Crown Process

1. 1
   Call and schedule. A live person answers. We ask for the Olympia Chimney model or series if you know it, the approximate chimney age, and what you’re seeing - water in the firebox, rust stains on the brick, animal noise, visible cap tilt. We book a 2-hour arrival window.
2. 2
   Camera-first inspection. The camera goes up first. Everything else follows the footage. Corrine or a trained tech runs a full NFPA 211 Level 2 scan: flue liner condition, smoke chamber, firebox, and the exterior crown and cap from roof level. Photos are time-stamped and stored to your job record under Haven Standard Clause 4.
3. 3
   Written price on site. Before any tool leaves the van, you get a line-item quote: cap or crown work, any flue repair found, materials specified by brand and part number. No verbal estimates. No “we’ll figure it out as we go.”
4. 4
   Parts decision with you. If your cap is still under Olympia Chimney’s 20-year limited warranty, we explain what OEM replacement preserves it versus what quality aftermarket options from our DuraFlex, Gelco, or Famco stock cost. You choose; we document the choice.
5. 5
   Repair and test. Cap jobs include a water test with a hose from ground level, checking for leaks at the flue joint. Crown rebuilds get a 48-hour cure before we return for a follow-up photo if the weather’s below 50°F. Every job ends with a second camera run to confirm flue integrity.
6. 6
   Documentation and guarantee. You receive the photo record, the written scope, and the written warranty. The 365-Day Done Right Promise applies from day one. If water gets past our cap or crown work in year one, we return and fix it.

Before

After

What Olympia Chimney Chimney Cap & Crown Costs in Leominster

Prices include the camera inspection, photo documentation, and disposal. We do not charge separately for the NFPA 211 Level 2 scan that accompanies cap or crown work. If we find liner damage or Class III creosote during the inspection, that’s quoted separately with its own line item. Call (978) 481-2900 for your exact written estimate - estimates are free, and we honor our Free Second Opinion on any competitor’s written quote.

Why Leominster Homeowners Call Level Two Chimney Leominster for Olympia Chimney Work

We’ve inspected and cleaned more than 38,000 chimneys since 2009, and a notable share of the cap and crown calls in Leominster involve Olympia Chimney products - partly because the brand sold heavily in New England during the 2010s building boom, and partly because our climate exposes the gaps between good-enough design and what actually lasts here.

Corrine Halstead and our techs know the difference between an Olympia Chimney cap that failed from defect and one that failed from installation error, and we document which it is so you’re not paying for someone else’s mistake. When Olympia parts are back-ordered - the multi-flue line had a 6-week gap in late 2023 - we have DuraFlex, HeatShield, and Gelco equivalents in our Haven buying network that meet or exceed OEM spec, and we’ll show you the comparison in writing before you decide.

Background-checked, uniformed technicians. License number on every page. A text when your tech is en route. And the 365-Day Done Right Promise stamped on every job. That’s the Haven Standard, and it’s how we work in Leominster.

FAQs